Weldy Iberian booster EX2, Руководство по эксплуатации, Страница: 2 / 48

2
Please read operating instructions carefully before use
and keep for further reference.
Operating Manual
(Original operating instructions)
WELDY booster EX2 / EX3
Extrusion Welder
EN
DANGER!
Danger when opening up the tool, as live components and connections are
exposed. Therefore, before opening, unplug the tool to ensure disconnection
from the mains. Electronically conductive material (e.g. PE-EL) must not be welded.
Danger of fire and explosion!
Incorrect use of the hand extruder (e.g. over-
heating of the material) can present a fire and explosion hazard, especially near
combustible materials and explosive gases.
Danger – can cause burns! Do not touch bare metal parts and emerging
material while hot. Allow the device to cool. Do not direct stream of hot air or
emerging material towards people or animals.
Warning
The tool must be operated under supervision. Heat can ignite flammable
materials which are not in view. The machine may only be used by qualified
specialists
or under their supervision. Children are not authorized to use
this machine.
For personal protection on building sites we strongly recommend the tool be
connected to a RCCB ( R esidual C urrent C ircuit B reaker).
Protect tool from damp and wet .
FI
Caution
Application
Welding PE and PP thermoplastics for applications in:
• container engineering • pipeline construction
• plastic fabrication • landfill sites and abandoned polluted areas
The voltage rating stated on the tool must correspond to the mains voltage.
If power failure occurs, the hot air blower switch and drive must be switched off
(release locking device).
120
230
Repairs should only be carried out by Weldy partners. Restricted to use with origi-
nal Weldy accessories and spare parts.