WELDTECH WT40DC, Руководство по эксплуатации

Страница: 11 / 16

11
WT40DC Plasma Cutter
www.weldtech.net.nz
failure of the pacemaker. The use of a plasma
cutter is NOT RECOMMENDED for pacemaker
wearers. Consult your doctor.
9. Ensure that the unit is placed on a stable lo-
cation before use.
WARNING!
If this unit falls while plugged in, severe injury,
electric shock, or fire may result.
NOTE,
used to address practices not related to per-
sonal injury.
General Safety Warnings
1. Maintain labels and nameplates on the plasma
cutter
These carry important information. If un-
readable or missing, contact Euroquip for a re-
placement.
2. Avoid unintentional starting.
Make sure the
plasma cutter is setup correctly and you are pre-
pared to begin work before turning on the plas-
ma cutter.
3. Unplug before performing maintenance.
Always unplug the plasma cutter from its elec-
trical outlet before performing any inspection,
maintenance, or cleaning procedures.
4. Never leave the plasma cutter unattended
whilst plugged in to power.
Turn power off
before leaving the plasma cutter unattended.
5. Do not touch live electrical parts.
Wear dry,
insulating gloves. Do not touch the electrode
or the conductor tong with bare hands. Do not
wear wet or damaged gloves.
6. Protect yourself from electric shock.
Do not
use the plasma cutter outdoors in wet condi-
tions.
7. Avoid inhaling dust.
Some dust created by
power sanding, sawing, grinding, drilling, cut-
ting, welding and other construction activities,
contain chemicals known to cause cancer, birth
defects or other harm. Your risk from these ex-
posures varies, depending on how often you do
this type of work. To reduce your exposure to
these chemicals, work in a well-ventilated area,
and work with approved safety equipment, such
as dust masks that are specially designed to filter
out microscopic particles.
8. People with pacemakers should consult
their physician(s) before using this
machine.
WARNING!
Electromagnetic fields in close proximity to a
heart pacemaker could cause interference, or
Plasma Cutter Safety Instructions
& Warnings
WARNING!
Protect yourself and others from possible seri-
ous injury or death. Keep children away. Read
the operating/Instruction manual before in-
stalling, operating or servicing this equipment.
Have all installation, operation, maintenance,
and repair work performed by qualified peo-
ple.
If an operator does not strictly observe all safety rules
and take precautionary actions, plasma cutting prod-
ucts and processes can cause serious injury or death,
or damage to other equipment or property.
Safe practices have developed from past experience
in the use of welding and cutting. These practices
must be learned through study and training before
using this equipment. Some of these practices apply
10. Transportation Methods
Lift unit with the
handles provided, or use a handcart or similar
device of adequate capacity. If using a fork lift ve-
hicle, secure the unit to a skid before transport-
ing.
CAUTION!
Disconnect input power conductors from
de-energized supply line before moving the
plasma cutter
11. Exercise good work practices.
The warnings,
precautions, and instructions discussed in this
instruction manual cannot cover all possible
conditions and situations that may occur. It must
be understood by the operator that common
sense and caution are factors which cannot be
built into this product, but must be considered
by the operator.