Weldex WDS-1010P, Руководство пользователя, Страница: 4 / 63

IMPORTANT SAFEGUARDS
u
Please install the product on a completely flat floor.
- Always check the strength and stability of the insta llation location.
- Do not drop the appliance on the floor. This may result in damage or injury.
u
Do not attempt to disassemble the appliance. To prevent electric shock, do not remove screws or
covers.
- There are no user - serviceable parts inside. Contact qual ified service personnel for
maintenance.
u
Stop using the appliance if there appears to be any operational problem.
- Immediately turn the power off to the appliance if there is any abnormal condition such as
smoke or unusual smells.
- Continuing to use the ap pliance under abnormal conditions may result in serious damage.
u
Always use the recommended power.
- Using incorrect power source ratings may result in fire, electric shock, or damage.
u
-
-
-
Always handle the connection cable with care.
Never damage or modify the connection cable.
Do not pull, expose to heat, or place heavy objects on the connection cable.
Non observance of these warnings may result in fire, electric shock or damage.
u
Never use the appliance in places where there are flammable materials.
- Never use the appliance in places where flammable materials such as gas are used.
This may result in fire, explosion, and other serious accidents.
u
Never touch un - insulated parts with wet hands.
- Touching un - insulated parts with wet hands may result in serious elect ric shock.
u
Never expose the appliance to water or moisture.
- If the appliance gets wet, immediately turn the power off.
- Stop using the appliance if it gets wet. Contact the manufacturer immediately.
u
Use the appliance indoors only.
- Do not place the applian ce outdoors or expose it to rain or moisture.
- If dropped in water, the appliance may be corroded and damage.
u
Do not use the appliance where there is excessive dust, smoke, or moisture.
- Using the appliance under such conditions may result in fire, electric shock or serious damage.
u
If the controller body gets dirty, turn the power off and wipe the surface with a soft cloth.
- Do not use chemical agents such as alcohol or benzene.
4