- High quality & cost-effective
- Low power consumption for cost saving
- Built-in WDR HD camera with motion sensor
- Built-in removable SD card for displaying advertising or corporate message
- On-board DVR including SD card slot
- Switch from advertisement display to camera video on motion activity
- User-definable text warning message
- Built-in alarm I/O
- VESA mounting pattern for ceiling or wall mount options
- Compatible S/W solution (verint nextiva 6.x, march video sphere R5)
> Features
Features
2
Specifications
3
Device Operation Manual
4
Section
WDL-EVPM5 WDL-EVPM7 WDL-EVPM8 WDL-EVPM10
Display
Screen size
5
＂
7
＂
8
＂
10.4
＂
Resolution
800
×
480
800
×
480
800
×
480
800
×
600
Brightness
600 cd/
㎡
400 cd/
㎡
450 cd/
㎡
450 cd/
㎡
Contrast ratio
500 : 1
300 : 1
Response time
< 20ms
< 30ms
Viewing angle
140(H) / 120(V)
150(H) /
110(V)
Aspect ratio
16 : 9
4 : 3
Camera
Image sensor
1/2.7" omnivision 1.3M progressive C-MOS
Lens
Fixed 3.7
㎜
F2.0
Active pixel
1280(H)
×
720(V)
Frame rate
30 fps
Shutter
Rolling shutter
Wide dynamic
Range
115
㏈
Sensitivity
3650
㎷
/Lux-sec
Interface
Storage
Internal Micro SD card slot for recording
External micro SD card slot for backup, media, upgrade
Alarm I/O
Terminal block 4P
Speaker
1W mono speaker
User I/F
Remote controller (coming soon)
Power, record LEDs
Mount
VESA™ 75
×
75
㎜
Power
Power adapter
12VDC 4A
Power
consumption
< 0.5A
Environmental
Operating
temperature
0
℃
~ 50
℃
Humidity
10 ~ 90% RH, non condensing
Dimensions
Outline
dimension (mm)
140(W)×121(H)×24(D)
184(W)×148(H)×27(D)
220(W)×172(H)×27(D)
254(W)×232(H)×27(D)
Weight
-
-
-
-
The display switches between camera display
and advertisement when motion is detected.
1) Monitor
There is a output of Alarm sound.
(Coming soon)
2) Speaker
When motion is detected, the image
is stored in the SD memory card
while it is displayed on the monitor.
3) Camera
Can receive signals from the remote
controller that comes with it.
(Coming soon)
4) IR Receiver
Is used to store advertisement playback,
camera image back-up, and software update.
6) External SD Card Slot
When alarm is triggered, camera image
is stored and there will be output in the alarm.
7) Alarm I/O Connector
It is a connection for power.
(Use the adapter supplied)
8) Power connector
VESA™ Mount 75×75
㎜
9) VESA™ Mount
5) Status Indicators
Operation Status
Power ON
-
ON
ON
ON
ON
Flash, slow
Flash, fast
ON
Recording video
Back-up video
Upgrade S/W
Red
Green
Back-up Operation
S/W Upgrade Operation
1. In external SD Card “backup_media” folder is created.
(Only lowercase recognized)
2. While the product is operating or booting, the memory is stored
in the external SD card.
3. If the Red LED is rapidly fleshing, files stored inside the created folder
is copied.
4. After the copying is finished, Red LED stops flashing.
1. The upgrade file provided by the manufacturer should be copied
into the root of the external SD card.
2. External SD card is inserted when the product is operating or booting.
3. When the Red LED is ON, this means that upgrade has started.
Do not turn off power or remove the SD card during this time.
4. When the upgrade is complete, the Red LED will turn off
and reboot will start automatically.
①
②
③
⑥
⑦
⑧
⑨
④
⑤
