manualshive.com logo in svg

Weldex WDB-5655VDN, Руководство пользователя

Поделиться
Скачать
Weldex WDB-5655VDN Скачать руководство пользователя страница 18

 

18 

 
 
 
 
If there are problems in operation, please refer to the items below. If the 
problem persists, please contact the agent you purchased this product from. 
 

Problems

 

Troubleshooting

 

Nothing appears 
on the screen.

 

 

• Please check the power connection. 
• Please check the video signal line connection. 
• Please check and make sure that the auto lens switch 

is set to DC (VIDEO) when using a VIDEO (DC) lens. 

The video image 
is not clear.

 

 

• Please check if the lens is clean. 

Please clean the lens with a clean cloth or brush. 

• Please adjust the contrast feature of the monitor. 
• Please readjust the back focus of the camera. 

The screen is 
dark.

 

 

• Please adjust the contrast feature of the monitor. 
• If you have an intermediate device, set the 75 / Hi-z 

properly, and check the terminals. 

• Please check if an auto iris lens is being used and 

adjust the brightness level. 

There is a 
problem with the 
camera 
operation. 

 

• Please check if an appropriate power source to the 

camera complies with the manufacturer's 

Standard requirement, or if the voltage keeps 
changing. 

The MOTION 
DETECTION 
function is not 
working.

 

• Please check if 'MOTION DETECTION' mode is 
turned on. 
• Please check if the MD LEVEL is too low. 
• Please check the setting of the MD AREA. 

Colors are not 
quite right.

 

• Please check the 'WHITE BAL' setting 

The screen is 
flickering.

 

 

• Please check if the camera is facing directly into 
sunlight or fluorescent light. 
• Please check if an auto iris lens is being used. 
• Please check the connection of the lens connector 
cable. 

COLOR mode is 
not working.

 

• Please check if the AGC menu is set to the OFF 
position. 

SENS-UP 
function is not 
Working.

 

• Please check if the AGC menu is set to the OFF 
position. 
• Please check if the SHUTTER menu is set to 
MANUAL mode. 

 
 
 
 
 
 
 
 
 

5. Troubleshooting 

 

Содержание WDB-5655VDN
























Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды