WeldCorp INVERTER TIG140, Руководство по эксплуатации для владельца

Страница: 6 / 15

INVERTER WELDERS
The product is a portable, lightweight, single-phase 230V, 60/60Hz welder with inverter
technology. It allows MMA welding with all electrodes type and the TIG welding of the most
metals except the aluminium alloys.
Can be connected to power generators with power equal to or higher than that reported in
the table in Page 9. It is equipped with “HOT START”, “ARC FORCE” and “ANTI STICK” functions.
This welding machine is for professional use only and is reserved for the industry.
INSTALLATION
The installation must be made by trained personnel in compliance to the standard IEC
60974-9 and the current and local legislation. To lift the machine it must be used the
handle positioned on the top of the product with the machine in OFF position.
The input voltage must match the voltage indicated on the technical plate located on the
product. The equipment shall only be used on a supply system that is a single-phase,
three-wire system with an earthed neutral.
Use the machine on electric system having supply features and power protection that are
compatible with the current required for its use.
For more details see the information on the plate placed on the machine.
Page 5
A
Welding current knob
B
Thermal protection
indicator LED
C
Negative pole (-)
D
Positive pole (+)
E
ON-OFF switch
F
Power cord
G
Selector TIG MMA