Weldclass Promax 180 Скачать руководство пользователя страница 6

Страница: 6 / 12

b. REPLACING COVER LENSES

[Refer to parts diagram under section 5]

Replacing Outer Cover Lens: Unfasten the

plastic clip on the bottom of the lens retainer

frame (6) & remove the ADF & frame (2+6).

Remove the outer clear lens (1) & replace.

Reverse these steps to re-assemble the

helmet.

Replacing Inner Cover Lens: Unfasten the

clip on the bottom of the lens retainer frame

(6) & remove the ADF & frame (2+6). Remove

the ADF (2) from the frame (6). Remove the

inner cover lens (3). Fit new cover lens &

reverse these steps to re-assemble the

helmet.

IMPORTANT: Use only original Weldclass

cover lenses to ensure correct fit and

conformance to safety standards.

4 / REPLACING ACCESSORIES & MAKING ADJUSTMENTS

a. REPLACING BATTERY [Promax 350 & 500 only]

When the batteries have become discharged, the LED light will turn on indicate that

the batteries should be replaced immediately.

[Refer to diagram under section 5] Unfasten the plastic clip on the bottom of the

lens retainer frame (6) & remove the ADF & frame (2+6). Remove the ADF (2) from

the frame (6). Slide open the battery cover & replace the battery. As indicated on

the battery cover, the battery should be placed with “+” side upwards (closest to the

battery cover). Reverse these steps to re-assemble the helmet.

Battery Terminal Cover

Содержание Promax 180













Результаты поиска

Содержание Promax 180

Отзывы:

Бренды по названию

Популярные бренды

Weldclass Promax 180, Руководство по эксплуатации

Результаты поиска

Содержание Promax 180

Отзывы:

Бренды по названию

Популярные бренды