Page
2
of
10
•
Use adequate electrical insulation with regard to the electrode, the work piece and any (accessible)
earthed metal parts in the vicinity.
•
This is normally achieved by wearing gloves, shoes, head coverings and clothing designed for this
purpose and by using insulating platforms or mats.
•
Always protect your eyes using masks or helmets with a special welding filter glass.
•
Use special fire-resistant protective clothing and do not allow the skin to be exposed to the
ultraviolet and infrared rays produced by the arc; other people in the vicinity of the arc should be
protected by shields of non-reflecting curtains.
•
The electromagnetic fields generated by the welding process may interfere with the operation of
electrical and electronic equipment.
•
Users of vital electrical or electronic devices (e.g. pace-makers, respirators etc.) should consult
a doctor before stopping in the vicinity of areas where this welding machine is used.
•
Users of vital electrical or electronic devices should not use the welding machine.
SECTION 3 : OTHER RISK WARNINGS
OVERTURNING:
Position the welding machine on a horizontal surface that is able to support
the weight to avoid the risk of overturning (e.g. inclined or uneven floors etc).
IMPROPER USE:
It is hazardous to use the welding machine for any work other than that for
which it was designed (e.g. de-icing mains water pipes). Do not use the
handle to hang up the welding machine.
SECTION 4 : INTRODUCTION AND GENERAL DESCRIPTION
This apparatus is a power source for arc welding, made specifically for alternating current (AC) MMA welding with
coated electrodes.
Electrode holder clamp
STANDARD ACCESSORIES:
Return cable and earth clamp
