Assembly
Spatter Shield Setup:
NOTE: Although the Weld-I Zoom HD camera head is generally
mounted away from the welding target, it is recommended to use a
spatter shield in front of the zoom lens.
Follow Spatter Shield Setup steps before completing Camera
Head/Control Unit Setup.
1.
Drop/Place spatter shield in front of camera lens (Figure 2).
2.
With fingers, begin threading on the retaining ring (Figure 3).
3.
Once started, finish threading on the retaining ring with the
retaining ring tool (Figure 4). DO NOT OVERTIGHTEN THE
RETAINING RING. This may cause damage to the spatter shield.
4.
If further magnification is required, thread on the applicable close
up lens by hand (Figure)
Figure 2
Figure 4
Figure 3
Figure 5
8
