53
2. Installation
2.1 Unpacking and positioning
WARNING!
While unpacking, the packaging materials (polythene
bags, polystyrene pieces, etc.) should be kept away
from children and pets. CHOKING HAZARD! RISK OF
INJURY!
(1)
Unpack the appliance carefully. Completely remove the
transport-protection. Be very careful and do not use any
aggressive or abrasive detergents to remove residuals of
the transport-protection.
(2)
The spray arms may be equipped with a transport
protection. Remove the transport protection before
installing the appliance.
(3)
Install the appliance in a dry and well-ventilated place.
(4)
Always install the appliance near of a water supply line, a
water drain device and a safety plug.
(5)
Install the appliance on a level, dry and solid surface. Check
the correct installation with a bubble level.
(6)
The back of the appliance must face the wall. The sides
must be aligned to the adjacent pieces of furniture and/or
walls.
(7)
Connect the appliance to the mains and water supply
properly.
(8)
The nameplate is inside the appliance or at the back.
2.2 Water inlet / drainage
installation
(1)
The water inlet and drainage installation must be carried
out by a qualified professional.
(2)
Use brand-new hoses and connector kids only.
(3)
We recommend to secure the water supply with a back-
pressure valve.
