Welch Allyn Scanteam 3000-X2, Руководство по программному меню

Страница: 12 / 27

selections
PREAMBLE/POSTAMBLE
SCANTEAM 3000/PDF Programming Menu
USE THIS PAGE
To default this page to asterisked (*) values.
To program preamble/postamble variables.
ENTER
DEFAULT
PREAMBLE
scan
scan
scan
POSTAMBLE
Notes:
(1) DEFAULT is NO preamble and <CR> <LF> postamble.
11
scan
EXIT
ESCAPE
scan
Up to EIGHT hexadecimal pairs,
00 through FF
variables
(Prefix)
(Suffix)
Up to EIGHT hexadecimal pairs,
00 through FF
Hex
Character
80 Insert Code ID
Result
Special Characters
87 XX Set LRC Checksum = XX (hexadecimal)
86 Insert LRC Checksum as a single byte
85 Insert LRC Checksum as two printable hexadecimal
characters plus a space
81 Insert AIM Symbology ID and Modifier
The 80 hex will be replaced by a single character
identifying the decoded barcode symbology.
See the Symbology Chart, facing page.
The 81 hex will be replaced by a three character string:
]CM
Where: ] is the symbology ID flag character
C is the symbology ID character
M is the modifier character
See AIM Guidelines on Symbology Identifiers for more
information.
When placed at the end of a transmitted message, the
LRC checksum provides a modest amount of error
detection. The checksum is computed as the
Exclusive–Or of every transmitted character, after
being initialized to zero.
The LRC checksum can have any value 00 through FF
hexadecimal, but not all characters in this range are
printable. This option causes the LRC checksum to be
transmitted as three characters; two hexadecimal
numbers plus a space.
A single character is transmitted having a value 00
through FF hexadecimal.
For initializing the checksum to some value other than
zero, XX can be any value 00 through FF hexadecimal.