PRINTING
1.
Place the PneumoCheck in the Printer/Charger well with the
display facing you. When the instrument is properly seated,
the orange charging indicator on the PneumoCheck will become
illuminated.
LIQUID CRYSTAL
DISPLAY
DATA
INDICATOR
(GREEN)
POWER
INDICATOR
(ORANGE)
CHARGING
INDICATOR
(ORANGE)
2.
The green DATA indicator on the Printer/Charger will flash
during data transfer and the PneumoCheck Liquid Crystal
Display will display SEND FVC and/or SEND MVV or SEND
CAL. When data transfer is complete, the green DATA indicator
will stop flashing and a triple tone beep will occur.
NOTE: Instrument may be removed after data transfer; data will
remain in printer memory until new data is entered or power is
disconnected.
3.
Press the PRINT button momentarily to begin printing. A full
FVC report takes approximately 20 seconds to print.
4. Tear the report off by pulling the paper towards you.
5. For a duplicate report, press the PRINT button again.
27