LAMP REPLACEMENT
CAUTION:
ALLOW LAMP TO COOL BEFORE CHANGING
.
Unscrew serrated section “A” counterclockwise from section
"B".
Depress lamp, turn
counterclockwise, and pull straight out. Replace with WA. No 02600 Lamp. Replace
by aligning lamp key wiih slot, depress fully, and turn clockwise until locked.
IMPORTANT
For best performance of halogen lamps, it is necessary to remove any grease or
fingerprints from the glass with a clean cloth moistened with alcohol.
Failure to follow cleaning procedure will result in permanent stains on the glass and
reduction of light output.
Fuse-Factory Replacement Necessary.
Ground Continuity Check-The resistance measured between the back plate of the
power source and the ground pin of the plug should be virtually zero.
For repairs, send complete unit (headlight and power source) to:
WELCH ALLYN, INC., Technical Services, 4341
State St. Rd. Skaneateles Falls, NY 13153-0220
Part No.
490081-2 Printed in U.S.A.
