Page of 10
2
Thank you very much for choosing a Wel-Bilt™ product! For future reference, please complete the
owner’s record below:
Model: _______________ Purchase Date: _______________
Save the receipt, warranty and these instructions. It is important that you read the entire manual to
become familiar with this product before you begin using it.
This machine is designed for certain applications only. The distributor cannot be responsible for
issues arising from modification. We strongly recommend this machine not be modified and/or used
for any application other than that for which it was designed. If you have any questions relative to a
particular application, DO NOT use the machine until you have first contacted the distributor to
determine if it can or should be performed on the product.
For technical questions please call
1-800-222-5381
.
INTENDED USE:
Your Wel-Bilt Jig Saw has been designed to cut accurately through plastic, wood and thin metals. It
allows you to make straight or curved cuts when used in a DIY (Do It Yourself) context or for
hobbyist purposes. It is not designed for commercial or industrial operations
TECHNICAL SPECIFICATIONS:
Input current:
3.2A
Input voltage:
120Volt~60Hz
No load speed:
3000 RPM
Cutting capacity in plate steel at 90
°
:
1/4in.
Cutting capacity in round wood and plastic at 90
°
:
2in.
Stroke length:
3/4in.
GENERAL SAFETY RULES
WARNING:
Read and understand all instructions.
Failure to follow all instructions listed
below may result in serious injury.
CAUTION:
Do not allow persons to operate or assemble this Jig Saw until they have
read this manual and have developed a thorough understanding of how the Jig Saw
works.
WARNING:
The warnings, cautions, and instructions discussed in this instruction
manual cannot cover all possible conditions or situations that could occur.
It must be
understood by the operator that common sense and caution are factors which cannot be built into
this product, but must be supplied by the operator.
SAVE THESE INSTRUCTIONS