Wel-Bilt 143396, Инструкция по эксплуатации

Страница: 2 / 7

SPECIFICATIONS:
Chain speed: 465 FPM; Length of guide bar: 8-5/16in.; Saw chain type: 25 AP;
Saw chain pitch: 1/4in.; Saw chain No. of drive links: 42
IMPORTANT SAFETY INSTRUCTIONS
WARNING: WHEN USING A CORDLESS CHAIN SAW, BASIC SAFETY PRECAUTIONS SHOULD ALWAYS BE FOLLOWED TO
PERSONS, INCLUDING THE RISK OF FIRE, ELECTRIC SHOCK, AND INJURY TO PERSONS, INCLUDING THE FOLLOWING:
READ ALL INSTRUCTIONS.
1. Keep Work Area Clean
Cluttered areas invite injuries. Do not start cutting until you have a clear work area,
secure footing, and a planned retreat path from the falling tree.
2. Consider Work Area Environment
Use extreme caution when cutting small size brush and saplings because the slender
material may catch the saw chain and be whipped toward you or pull you off balance. Do
not operate a chain saw in a tree unless specifically trained to do so. When cutting a limb
that is under tension be alert for spring back so that you will not be struck when the tension
in the wood fibers is released. Don't expose chain saw to rain. Don't use chain saw in
damp or wet locations. Do not use chain saw in presence of flammable liquids or gases.
3. Guard Against Electric Shock
Prevent body contact with grounded surfaces. For example: metal pipes, wire fences.
4. Keep Children Away
Do not let visitors contact chain saw. All visitors should be kept away from work area.
5. Store Idle Chain Saw
When not in use, chain saws should be stored in a dry, and high or locked-up place.
Keep out of the reach of children. When storing saw, use a scabbard or carrying case.
6. Don't Force Chain Saw
It will do the job better and safer at the rate for which it was intended.
Item No. Description
1 Right cover, chain
2 Inner gear
3 Star gear
4 Shaft
5 Bearing
6 Plate
7 Screw, ST
8 Washer
9 Sprocket
10 Washer, bore
11 Locking ring
12 Left cover, chain
13 Screw
14 Guide Bar, chain
15 Chain
16 Washer
17 Spring washer
18 Bolt
19 Front hand guard
20 Screw, left case
21 Case, left
Item No. Description
22 Rubber cover
23 Cover, motor
24 Relief
25 Spring
26 Wire
27 Support, motor
28 Motor & gear assy
29 Button, switch
30 Case, right
31 Hex Key
32 Battery
33 Connector, body to battery
34 Switch
35 Safety switch
36 Spring, safety
37 Cover, inner
38 Screw
39 Big washer
40 Star gear
41 Plate, gear inner
36
35
34
33
41
40
39
38
37
24
25
28
29
30
26
27
31
32
20
19
21
23
22
9
10
11
12
1
8
7
6
5
4
3
2
13
14
15
16
17
18
10
Thank you very much for choosing a Wel-Bilt
TM
product! For future reference,
please complete the owner's record below:
Model: _______________ Purchase Date: _______________
Save the receipt, warranty and these instructions. It is important that you read
the entire manual to become familiar with this product before you begin using it.
This machine is designed for certain applications only. The distributor cannot
be responsible for issues arising from modification. We strongly recommend
this machine is not modified and/or used for any application other than that for
which it was designed. If you have any questions relative to a particular application,
DO NOT use the machine until you have first contacted the distributor to
determine if it can or should be performed on the product.
For technical questions please call 1-800-222-5381.
1