WEKA_IOM_C-0068_TgxV_DN250_PN6_EN / 17.04.2020
5 / 38
2.
Safety
2.1
General safety information
The manual contains detailed descriptions for safe and correct installation, operation and maintenance of
the product.
Read the manual carefully and thoroughly to become familiar with the product.
The manufacturer accepts no liability for damage caused as a result of failure to comply with the safety
information and warnings.
2.2
Explanations of symbols and notes
Safety information and warnings are intended to prevent hazards for the life and health of users or
maintenance staff and to avoid property damage. They are highlighted by the signal words defined below. In
addition, they are marked by warning symbols (pictograms) at the place they appear.
Safety information and warnings indicate important information. The following symbols are used to point out
specific properties or hazards:
Danger
Severe physical injuries and/or major property damage may occur in case that the
appropriate precautionary measures are not taken or not complied with.
Warning
Physical injuries and/or major property damage may occur in case that the appropriate
precautionary measures are not taken or not complied with.
Caution
Minor physical injuries and/or property damage may occur in case that the appropriate
precautionary measures are not taken or not complied with.
Please note
Marks important information on the product and/or handling of the product that requires
specific attention.
