At first sight a drill rig like any other.
However, the new diamond core drill rig KS 18 has certain features which distinguish it from standard rigs.
Here are some of the special features:
Guides and bearings
- Slip guides, slideways and bearings are made of a new compound material, i.e.
extremely abrasion resistant, low in maintenance and extremely smooth gearing.
Thus, the slip guides can be prestressed easily. The feed carriage now slides absolutely free from
backlash, yet running free on the drilling column.
For the drill bit this means:
less pipe friction, less vibration
especially at the opening, but
much higher endurance
.
Operating
- The KS 18 drill feed is operated by an ergonomically designed hand wheel which simply be
placed on to the feed pinion either on the left- or right-hand side.
The rig podestal can be fixed with dowel screws or vakuum. Only Vakuum fittings and a gasket are
required for the vakuum fixture.
The drill column can, of course, be adjusted to an angle of more than 80
E
.
Corrosion Protection
- All essential parts are rustproof. Drill column, struts, levelling screws, feed carriage
levers and feed pinion are made of stainless steel. Feed carriage casing and pedestal are made of corro-
sion resistant aluminium alloy.
The KS 18 is recommended for WEKA diamond core drilling machines Type DK 12, DK 13 and DK 14, as
well as for the DK 16, DK 17 and DK 18. The drilling machine is fixed into the rig at the collar. The spread
diameter is 60 mm.
WEKA Elektrowerkzeuge
Auf der Höhe 20, D 75387 Neubulach / Germany
Telephone: +49 7053 96816-0 · Telefax: +49 7053 3138
Internet:
· E-mail:
Subject tochange without notice 1114
