weJupit WJ-D330 Pro, Руководство пользователя

Страница: 8 / 28

Breakdown?
1. Restart the device.
2. Remove the memory card to test again.
3. Reset the system.
4. Contact the merchant service for exchange or repair.
Dash camera cannot start
1. Check if the power cable is connected properly
2. Remove the memory card and try again.
3. Connect the device to a computer and test again.
4. Reset the system.
06
INSTALLATION INSTRUCTIONS
Attentions:
1. Before installation, please connect the power and check whether the
product works properly. Do not pull the wires too hard. Connect the wires
correctly, do not connect the wrong wires, connect to the wrong outlet, or
insert at the wrong direction.
2. If the product works properly before installation but does not work after, it
is probably because something went wrong during the installation. In this
case, please check whether there is a short circuit or the wiring is wrong.
3.Never destroy or modify the wires during installation. If the dash camera
or the wires are damaged during installation, you should replace the whole
set and install again.