manualshive.com logo in svg

WEISS SW140, Руководство по эксплуатации

Поделиться
Скачать
WEISS SW140 Скачать руководство пользователя страница 21

WEISS

High Torque Dreheinheit SW140 R10-2010

21/36

Installation

5.3 Assemble machine

5

5.3

Assemble machine

Different holes and thread drills are available to assemble the machine.

The existing holes and/or thread drills must be used to assemble 

the machine. Additional drills or welding on the machine is prohibited. Damage to 
the machine.

The machine can be assembled in the admissible installation layers at customer location 
using the existing drills and/or thread drills.

1. Set up the machine at the assembly position.

2. Tighten the attachment screws however, not all the way.

3. Align the machine.

4. Tighten the attachment screws all the way.

5. Make electrical connections in accordance with the circuit diagrams.

5.3.1

Installation of additional components

To assemble additional components, the existing holes and/or 

thread drills must be used. Additional drills or welding on the machine is prohibited. 
Damage to the machine.

By using the existing drills and/or thread drills additional components can be mounted at 
the shaft.

5.4

Installing the safety equipment

The operator is responsible for providing for safety equipment and emergency stop but-
tons. The machine may not be operated without suitable safety equipment.

5.5

Instructions on disposal of packaging material

Packaging materials should be reused or disposed of correctly in compliance with natio-
nal regulations.

Содержание SW140





































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды