OWNERS MANUAL FOR WEISS MEDUS D/A CONVERTER
Operation
Unpacking and Setup of the MEDUS
Carefully unpack the MEDUS. The following items should be enclosed:
•
The MEDUS D/A Converter unit
•
The MEDUS Remote Control unit
•
This Owner’s Manual
•
A Certificate of Guarantee
The MEDUS should be placed horizontally on a plane surface. Avoid putting any other equipment or
any other material on top of the MEDUS as not to compromise the MEDUS’ heat convection system.
Mains Connection
Before connecting the mains cable make sure the voltage selector switch on the back of the unit
(integrated into the mains connector) is set to the appropriate voltage. If this is not the case then
open the mains selector lid with a strong screwdriver. The mains plug must not be plugged into the
connector for that purpose. Now you see a black selector drum with appropriate voltages written in
white letters. Remove this drum, turn it to the appropriate voltage and reinsert it. Now firmly close
the lid again. Connect the MEDUS to the wall outlet with the mains cable.
Driver installation
For OSX (Apple) operating systems it is not necessary to install any driver for USB. For Windows based systems a driver is
included on the CD in the MEDUS manual.
