WEISS DAC202 Скачать руководство пользователя страница 22 | Manualshive

Страница: 22 / 32

background image

OWNERS MANUAL FOR WEISS DAC202 D/A CONVERTER

Page

22

Date: 03/10

XLR selected as sync source: XLR signal goes to Firewire.
RCA selected as sync source: RCA signal goes to
Firewire.
Toslink selected as sync source: Toslink signal goes to
Firewire.
Internal or WC BNC or 1394 bus selected as sync source:
The Firewire output is muted.

Mode: Firewire input / single wire / insert active

- The Firewire input is routed to: XLR out, RCA out, APB.

- The Firewire output (going to the computer for
recording) is fed from the source specified as the sync
source:
XLR selected as sync source: XLR signal goes to Firewire.
RCA selected as sync source: RCA signal goes to
Firewire.
Toslink selected as sync source: Toslink signal goes to
Firewire.
Internal or WC BNC or 1394 bus selected as sync source:
The Firewire output is muted.

- The DAC chip is fed from the source selected in the
Insert mode menu, i.e. from either the XLR or RCA or
Toslink input.

Mode: Firewire input / dual wire / no insert

- The Firewire input is routed to: DAC chip, XLR out (left
channel), RCA out (right channel), APB.

- The Firewire output (going to the computer for
recording) is fed from the source specified as the sync
source:
XLR selected as sync source: XLR is the left channel
signal going to Firewire and RCA is the right channel
signal going to Firewire.
RCA selected as sync source: RCA is the left channel
signal going to Firewire and XLR is the right channel
signal going to Firewire.
Toslink selected as sync source: Not supported.
Internal or WC BNC or 1394 bus selected as sync source:
The Firewire output is muted.

Mode: Firewire input / dual wire / insert active

- The Firewire input is routed to: XLR out (left channel),
RCA out (right channel), APB.

- The Firewire output (going to the computer for
recording) is fed from the source specified as the sync
source:
XLR selected as sync source: XLR is the left channel
signal going to Firewire and RCA is the right channel
signal going to Firewire.
RCA selected as sync source: RCA is the left channel
signal going to Firewire and XLR is the right channel
signal going to Firewire.
Toslink selected as sync source: Not supported.
Internal or WC BNC or 1394 bus selected as sync source:
The Firewire output is muted.

«
...
20
21
22
23
24
...
»

Содержание DAC202

































Отзывы:

Нет отзывов

Похожие инструкции для DAC202

Бренд: Tabor Страницы: 111

Бренд: Q Acoustics Страницы: 7

Бренд: Velleman Страницы: 28

Бренд: Yamaha Страницы: 30

Бренд: Wacker Neuson Страницы: 22

Бренд: TTI Страницы: 7

Бренд: ICP DAS USA Страницы: 7

Бренд: Reach Страницы: 13

Бренд: KAMEHA Страницы: 12

PURE SINEWAVE PS3000-12

Бренд: Samlex Europe Страницы: 2

Бренд: OTS Страницы: 14

Бренд: CYP Страницы: 16

Бренд: Keysight Technologies Страницы: 37

Бренд: CEL-MAR Страницы: 16

Бренд: Santerno Страницы: 156

Бренд: TR-Electronic Страницы: 37

4Caster Broadcast 3500

Бренд: Envivio Страницы: 2

Бренд: J-Tech Digital Страницы: 8

Бренды по названию

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Популярные бренды

Загрузить еще бренды