Risk of poisoning!
Blocked air inlets can lead to the build-up of toxic Carbon
Monoxide. Air inlet and outlet vents in the installation area should
therefore be kept open and clear from obstructions at all times.
When flue gas can be smelled:
1.
Turn off the equipment.
2.
Open doors and windows.
3.
Alert the heating company/installer.
The smell of flue gas can also occur if the unit has not been used
for a long period of time. In this case, the condensate trap in the
unit must first be filled via the cleaning aperture of the flue gas
system.
Installation area
Unsuitable ambient conditions may damage the equipment. For
safe, reliable operation ensure that
•
the installation area is well ventilated and dust free for
room air dependant operation,
•
the combustion air does not contain Halogen Hydrocarbons
(such as in sprays, solvents, washing or cleaning products).
Working on the heating system
Improperly carried out work on the heating system can result in
serious injury. Installation, commissioning, adjusting, servicing and
repairs must only be carried out by qualified personnel.
The unit must also only be opened by qualified personnel.
Fuel
The condensing boiler may only be operated with fuel oil
EL-1low sulphur (sulphur content max. 50 ppm) to DIN 51603-1.
Do not use additional additives.
For your safety
2
15
Chimney sweep function
•
Activate the symbol list by turning the dial knob and
set cursor to chimney sweep symbol.
•
Press
key to activate chimney sweep function.
•
The function remains active for 25 minutes.
•
The 3 larger numbers displayed show the current boiler
rating in kW.
•
The 2 smaller numbers displayed show the current boiler
temperature.
•
To exit the chimney sweep functions turn dial knob until
ESC is displayed and press
key.
•
After approximately 90 seconds, the standard display
reappears.
90 sec.