torque blade
Note: A D-shaped torque blade is shown, but installation is the same for all models.
C
D
Insert your key and test the latch for smooth operation.
Remove your key and make sure the bolt is fully extended.
If the latch does not
extend or retract
smoothly, adjust the
mounting screws.
fully
extended
4 / 13
© 2016 Spectrum Brands, Inc.
Kevo Support: www.weiserlock.com/kevo/support
USA: 1-800-677-5625 • Canada : 1-800-501-9471
A
Place the mounting plate on the door so that the torque
blade inserts through the center hole.
Black Components Only:
To
determine which mounting
screws to use, test one of
the thicker screws first.
If the thicker screw fits, continue
installing the thicker screws.
If the thicker screw doesn't fit,
install the thinner screws.
5
Install the mounting plate and test your latch.
B
Keep parallel to the
edge of the door.
Tighten
screws evenly.
Secure the mounting plate with the mounting screws.