Weiro WT - 315 DI, Руководство по эксплуатации

Страница: 9 / 23

-
８
-
2. Installation:

The input power of this series welding machines is three phase AC 380V/50Hz. Operator must
use the properly disconnected switchboard or switch box(not provided by our company)
which is equipped circuit breaker, and should ground the welder safely and firmly.

Connect ground lead.

Connect terminal socket (+) to workpiece on AC/DC TIG, to stick holder cable on SMAW.

Connect TIG torch to terminal socket (-) on AC or DC TIG, connect socket (-) to workpiece on
SMAW.

Connect welder’s gas inlet to gas regulator by gas hose.

Connect TIG torch’s gas inlet to welder’s gas outlet.

Wire foot pedal switch or torch control cable to control cable socket.

When use water-cooled torch, connect water circulator to welder’s water inlet and torch’s
water inlet to welder’s water outlet.

Power on air switch on the welder’s rear panel.

Connect input power cable to switch box and power on.