Additional signal words that are not preceded by the attention symbol are:
Safety
General Safety Information
The safety practices described in this manual are meant as guidelines for safe operation under most conditions and
are meant to supplement any safety rules and/or laws that have been established at your worksite.
Personal Safety
Signal Words
Throughout this manual are statements preceded by a special attention symbol:
“ ”
. The symbol is used with the
following signal words to attract your attention to information regarding safety issues.
IMPORTANT:
Indicates information that possesses special significance to the described procedures.
Tip:
Indicates information that may simplify the procedures or make your job easier.
WARNING:
Indicates a hazardous situation which, if not avoided, could result in serious injury or death.
CAUTION:
Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
NOTICE--DAMAGE ALERT:
Indicates information that should be acted upon to avoid significant
equipment or machine damage that could result in unplanned downtime or maintenance.
WARNING:
Read this entire brochure prior to conducting the procedures described
in this manual. Failure to follow these instructions could result in injury or death.
WARNING:
When performing the work described in these instructions, use proper personal protection equipment to
help avoid injury. Always wear hard hat, gloves, safety shoes, eye protection, hearing protection and fall protection that
complies with regional, national and worksite requirements (e.g., OSHA, MSHA) when working with this equipment.
To avoid injury to bystanders, keep them a safe distance from the work area.
WARNING:
The practices described are meant as guidelines for safe operation under most conditions and are meant
to supplement any safety rules and/or laws that may be in force in your area. Your safety and the safety of others results
from putting into practice your knowledge of the correct operating procedures. Ensure welds are applied by competent
welders using good welding practices. Ensure that operators and bystanders are well clear of the load during lifting
operations.
