16
2.3.4 Dip Switch
Pin3,4 unused
z
Touch Screen Calibrate mode: In this mode when you power on the MT600, the
screen will display a “+” sign at the
center of the screen. Use a stylus or
finger to push the center of the “+”
until it moves. The “+” moves to
upper-left, lower-left, lower-right and
upper-right corners. When all five “+”
are done the “+” will disappear. The
Touch Screen parameter will store at
Flash Rom.
z
Boot Loader mode: Load new Windows CE image file.
If the MT600 already load the CE image with boot loader. Set the DIP SW2 ON then
power ON into boot loader mode. Refer the load Win CE image document.
Pin1 Pin2 Mode
OFF OFF Normal
ON OFF Touch Screen Calibrate mode
OFF ON Boot
Loader
mode
