weintek CMT G04 Series, Руководство пользователя

Страница: 17 / 29

cMT-G04 UserManual
V1.0.0 14
How to create a cMT-G04 project Chapter4.
This chapter explains how to create a project when cMT-G04 is used as an OPC UA Server, and how
to set the addresses used to communicate with OPC UA Clients. The basic steps are:
1. Add a driver into Device List in EasyBuilder Pro.
2. Enable OPC UA Server and designate communication address.
3. Download the project to HMI.
The following explains how to set up OPC UA Server in the project.
4.1. Create a new project
Step 1. Launch EasyBuilder Pro and select a cMT-G04.
Step 2. Add a device into the list and configure communication parameters. When using
cMT-G04 as an Ethernet bridge between HMI and PLC, cMT-G04’s SW1 & SW2 should be
in the same domain as HMI and PLC.