We reserve the right to make technical changes.
14
Wind Support
Loosen the fixing screw in the adjustment base (4.) Turn the screws under the adjustment base
(turning in the direction in which the wind support can be tilted) to adjust the angle of the wind
support (5.)
Once the required angle is reached, re-tighten the screw located in the centre of the adjustment
base (4.) and re-tighten the four grub screws at the bottom end of the wind support (1.)
8
Carrying the wind supports when fitted to a moulded base
To carry or move the wind supports when fitted to a moulded base, lift by the moulded base. To lift,
take hold of the base by the recessed grips under the moulded base
.
