Sottezza II Stretch/ LED / Sottezza II OptiStretch/ LED
Maintenance Instructions and Directions for Use
Version 4
2020-05-06
We reserve the right to make technical changes
Item number
118074-0000
Page 12/13
6
Rectifying faults
Our recommendation:
Faults should only be rectified by your specialist retailer. Please bear in
mind that faults which are not repaired properly will compromise the safety of your awning
system.
You should therefore call your specialist retailer immediately if a fault occurs. This person is your
local specialist and will gladly provide you with swift, professional advice. To help you
troubleshoot, a few faults are listed below.
6.1 Troubleshooting
(by a suitable specialist retailer)
Error
Cause
Remedy
•
System not running
•
No power
•
Drive incorrectly connected
•
Motor is too hot and has
been shut down by the
thermo protector
•
Connect to the mains
•
Connect to the mains
(authorised personnel only)
•
Wait approx. 15 to 20
minutes until the drive has
cooled down
•
Squeaking
•
Bearing surfaces not
lubricated
•
Maintenance and care (fitter)
7 Conversions or retrofits
Your sun protection system can only be converted or retrofitted to a limited extent.
The following conversions are possible:
•
Replacing the fabric
•
Distance rope
Your sun protection system can also be retrofitted with automatic control units, e.g. with sun and
rain sensors. For more details, contact your specialist retailer, who will be happy to advise you.
8
Disassembly and disposal
Although this product does not contain any materials which pose a risk or danger to other people
or the environment, the parts from the sun protection system should nevertheless be disposed of
properly. When disassembling and disposing of the sun protection system, fully slacken or
secure the tensioned parts to prevent them from opening or extending automatically. A suitably
qualified company should be engaged to perform this task.
9
Noise level
When installed, the sun protection system's noise level has been measured at below 70 dB(A).
