Cassita II/ Cassita II LED
Instructions for assembly
Version 10
2021-03-25
We reserve the right to make technical changes
Item number
116519-0000
Page 7/46
2.3 Transportation
The maximum permissible axle loads and gross vehicle weight of the goods vehicles must not
be exceeded. Loading a vehicle can alter its handling characteristics.
The transported goods must be fastened properly and safely. Keep packaging dry. Softened
packaging can come loose and cause accidents. Packaging which has been opened for goods
inward purposes must be sealed again properly for further transport.
When unloaded, the awning must be carried to the place of installation the right way round so it
does not have to be turned round again in a confined space. The instructions on the packaging
about which way up the awning should be placed must be noted.
2.4 Lifting with ropes
If the awning needs to be raised to a higher level using ropes, the awning must be:
•
removed from the packaging;
•
attached to the ropes so that it cannot slide out;
•
lifted horizontally and evenly.
The same applies when disassembling the awning.
2.5 Mounting brackets
Before beginning the installation work, check
•
that the mounting brackets supplied are of the same type and of the same quantity as
ordered,
•
that the information provided in the order about the installation surface tallies with the actual
installation surface on site.
If any deviations should be found whatsoever which compromise the safety of the installation,
the installation work must not be carried out.
2.6 Fixing material
The awning complies with the requirements of the wind resistance class shown on the CE
conformity marking. When fitted, it only complies with these requirements provided that
•
the awning is fitted with the type and number of brackets recommended by the
manufacturer, and
•
the awning is fitted taking into account the extraction forces recommended by the
manufacturer, and
•
the manufacturer's recommendations for the dowels to be used have been complied with.
2.7 Ladders
Do not lean ladders against the awning or fix them to the awning. Ladders must be on a firm
base and provide adequate support. Only use ladders with adequate load-bearing capacity.
2.8 Anti-fall guards
Workers run the risk of falling when working at elevated heights. Suitable anti-fall guards must
be used
