Weinmann ULM CASE I, Описание и инструкция по использованию

Страница: 10 / 56

10
EN
Operation
5.4 Inserting Oxygen Cylinders
Be sure to wash your hands before you insert or change
oxygen cylinders.
If you want to fasten an oxygen cylinder of 0.8 liters or
2.0 liters into the case bottom
(9), use accessory WM 15141, Set of two belts for
oxygen cylinders (17). Fasten the oxygen cylinder in the
oxygen cylinder compartment (7) as shown in the illustra-
tion. To fasten a 2.0-liter oxygen cylinder, use the outer
clamp (6) on the floor of the case. If you want to fasten an
0.8-liter cylinder, use the middle and left clamps. Be sure
that you pull the belts tightly during assembly in order to
prevent the cylinders from slipping out of place.
5.5 MEDUMAT Holder
To fasten a MEDUMAT ventilation device into the case
bottom, use the holder for MEDUMAT (22). Click the ME-
DUMAT holder into place in the case bottom as shown in
the illustration. Then place the MEDUMAT so that the lower
grid on the device catches in the gap in the holder. Press
the MEDUMAT up into the holder until you hear it click into
place.
Important!
Your hands must be free of
grease and products contai-
ning alcohol when you insert
or change oxygen cylinders.
Fire hazard!
W
EIN
M
AN
N
: H
AM
BU
RG
W
EI
NM
AN
N
: H
AM
BU
RG