manualshive.com logo in svg

Weiler E2850, Руководство оператора и по техническому обслуживанию

Поделиться
Скачать
Weiler E2850 Скачать руководство пользователя страница 2

WEILER E2850 REMIXING TRANSFER VEHICLE

 

WEILER WARRANTY 

-Exclusive Limited Warranty-

 

 

The manufacturer warrants each new WEILER PRODUCT to be free of defects in workmanship and 
material at the time of shipment to first end-user. The warranty period is 12 months.  

A.  If a defect is found, and the authorized dealer is notified during the 12 month warranty period, the 

manufacturer will repair or replace any part or component on the unit that fails to conform to the 
warranty. 

B.

 

The manufacturer has the right to repair any part or component prior to replacement. 

C.

 

All new replacement parts will carry a six (6) month warranty. Remanufactured parts will carry a 
ninety (90) day warranty. 

D.

 

ENGINES, TIRES, BATTERIES and ATTACHMENTS are normally warranted by their 
manufacturers and may have different warranty than that of the manufacturer. 

 
NO WARRANTY OF ANY KIND SHALL BE MADE WITH RESPECT TO: 

A.

 

Any defects or damage caused by misuse, misapplication, negligence accident or failure to maintain 
or use the product in accordance with current operating instructions. 

B.

 

Any product that has been used with an attachment or in an application where excessive workload or 
stress causes failure of the part or component. 

C.

 

Failure to conduct normal maintenance and operating service to include but not limited to providing 
lubricants, coolant, fuel, inspections and regular tune-ups. 

D.

 

Unauthorized alterations, modifications and or replacements parts and components not manufactured 
by the manufacturer. 

 
THE MANUFACTURER IS NOT RESPONSIBLE FOR THE FOLLOWING: 

A.

 

Charges for travel time, mileage or overtime. 

B.

 

Airfreight charges for parts shipped to point of service. 

C.

 

Transportation charges to and from point of service. 

D.

 

Consumable parts such as cutting edges, filters and items expected to receive normal wear and tear. 

E.

 

Liability or damages of any type due to lost profits or expenses to acquire replacement products 

 
EXCEPT AS SPECIFICALLY STATED ABOVE, THE MANUFACTURER MAKES NO WARRANTY 
OR REPRESENTATION, EXPRESS OR IMPLIED, INCLUDING, WITHOUT LIMITATION, ANY 
WARRANTY OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. THE 
WARRANTY SET FORTH ABOVE AND THE OBLIGATIONS AND LIABILITIES OF THE 
MANUFACTURER THEREUNDER REPRESENT CUSTOMER’S SOLE AND EXCLUSIVE 
REMEDIES AND ARE EXPRESSLY MADE IN LIEU OF ANY AND ALL OTHER REMEDIES, 
WARRANTIES, GUARANTIES OR LIABILITIES. THERE ARE NO WARRANTIES WHICH EXTEND 
BEYOND THE DESCRIPTION ON THE FACE HEREOF. IN NO EVENT SHALL THE 
MANUFACTURER’S LIABILITY HEREUNDER EXCEED THE PURCHASE PRICE FOR THE 
PRODUCTS, NOR SHALL THE MANUFACTURER BE LIABLE FOR ANY SPECIAL INDIRECT, 
INCIDENTAL OR CONSEQUENTIAL DAMAGES. 

10/21/05 

Содержание E2850













































































































































































































































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды