WEIHONG PM53B, Руководство производителя

Страница: 3 / 42

Specialized Concentrated Focused
Preface
「
I
」
Preface
About This manual
This manual is intended for manufacturers. If you use the CNC system for the first time, you need to
read through the manual. If you are experienced with the system, you can search for the desired info
via the contents.
With 5 chapters, this manual can be divided into 4 parts, as follows:
1) Part 1: preface, introducing the precautions about transportation and storage, installation, wiring,
debugging, usage, and so on. You need to read them carefully beforehand to ensure safe
operations.
2) Part 2: product, including chapter 1. It consists of product overview including system configuration
and introduction to interfaces.
3) Part 3: operation and application, including chapter 2, 3 and 4, which introduces wiring instruction,
wiring, and machine tool debugging respectively.
4) Part 4: appendix, including chapter 5, which states the software license agreement.
Applicable Product Models
This manual is applicable to PM53B/53C control card. Refer to the table below for details:
Product Model Remarks
PM53B/53C Control Card
Self-developed high-performance motion control card, it can be
connected with stepping or servo driver with 3 channels, for supporting
three axes synchronized motion. It adopts position control method and
differential signal control. Pulse frequency is 160KHZ. The system
boasts of protective mechanism and is a proven stable control system.
Contact Us
You can contact us by the following info for technical support and pre-sales/after-sales service:
Company Name: Weihong Electronic Technology Co., Ltd.
Headquarters Address: No.1590, Huhang Rd., Fengxian, Shanghai, PRC 201400
Tel: +86-21-33587550
Fax: +86-21-33587519
Website: http://en.weihong.com.cn