4
5
6
V1.0 / 2020-10-29
8. Power Input Wiring
The PoE Injector supports a single power supply input via the 4-pin terminal located on top
side of the device. For each power input V+ and V- there are 2 internally connected pins
available. Refer to illustration below for correct wiring.
Warning / Avertissement
Take into consideration the following guidelines before wiring the device
o
Tenez compte des directrices suivantes avant de câbler l’appareil.
Terminal block is mating with Plug and suitable for 12-24AWG (15A).
Torque value 4.5 lb-in.
o
Le bornier est compatible avec les connecteurs et convient pour 12-
24AWG (15A). Valeur de couple 4,5 lb-in.
The temperature rating of the input connection cable should higher than
105°C.
o
La température de service nominale du câble d’entrée doit être
supérieure à 105 °C.
Supplied by SELV source evaluated by UL 61010-1 or 61010-2-201
power supply only.
o
Fourni par la source SELV évaluée uniquement par l'alimentation UL
61010-1 or 61010-2-201.
9. Communication Connections
The PoE Injector is equipped with the following Ethernet interfaces:
2 x 10/100/1000 Base-T(X) ports
2 x 10/100/1000 Base-T(X) PoE ports (P.S.E)
Both port groups (Eth 1 and Eth 2) are working completely independent from each other.
By design the device behaves as being 2 x 1-Port-PoE-Injectors.
Please only use cables suitable for the respective type of communication and ensure that
signals are protected from possible interference.
9.1
10/100/1000Base T(X) PoE Ports (P.S.E.)
In case of active PoE sourcing the Injector uses the pinout of “Alternative A, MDI-X
mode” of 802.3af/802.3at standards. Please see the details in the following tables.
For pin assignments for different types of cables, please refer to the following tables.
Pinout for
10/100Base-T(X)
RJ-45 Input (Data Only)
RJ-45 Output (Data and PoE Power)
Pin
No.
Symbol
Description
Symbol
Description
1
RX+
Data Receive
RX+ (Vdc+)
Data Receive and Feeding power (+)
2
RX-
Data Receive
RX- (Vdc+)
Data Receive and Feeding power (+)
3
TX+
Data Transmit
TX+ (Vdc-)
Data Transmit and Feeding power (-)
4
NC
Not connected
NC
Not connected
5
NC
Not connected
NC
Not connected
6
TX-
Data Transmit
TX- (Vdc-)
Data Transmit and Feeding power (-)
7
NC
Not connected
NC
Not connected
8
NC
Not connected
NC
Not connected
Pinout for
100Base-T
RJ-45 Input (Data Only)
RJ-45 Output (Data and PoE Power)
Pin
No.
Symbol
Description
Symbol
Description
1
BI_DA+
Data BI_DA+
BI_DA+ (Vdc+)
Data BI_DA+ and Feeding power (+)
2
BI_DA-
Date BI_DA-
BI_DA- (Vdc+)
Date BI_DA- and Feeding power (+)
3
BI_DB+
Data BI_DB+
BI_DB+ (Vdc-)
Data BI_DB+ and Feeding power (-)
4
BI_DC+
Data BI_DC+
BI_DC+
Data BI_DC+
5
BI_DC-
Data BI_DC-
BI_DC-
Data BI_DC-
6
BI_DB-
Data BI_DB-
BI_DB- (Vdc-)
Data BI_DB- and Feeding power (-)
7
BI_DD+
Data BI_DD+
BI_DD+
Data BI_DD+
8
BI_DD-
Data BI_DD-
BI_DD-
Data BI_DD-
10. LED Indicators
The front panel of the Ethernet PoE Injector contains following LED indicators:
LED
Color
Status
Description
PWR
Green
On
Power is being supplied to power input.
Off
Power is not being supplied.
PoE active
Blue
On
PoE injection is active.
Off
No PoE device connected.
11. Specifications
Technology
Standards
IEEE 802.3 for 10Base-T
IEEE 802.3u for 100Base-TX
IEEE 802.3ab for 1000Base-T
IEEE 802.3af/at for Power over Ethernet
Interfaces
RJ45 Ports
10/100/1000BaseT(X), auto negotiation, Full-/half-duplex
mode, MDI-X
LED Indicators
PWR (Power), PoE active (PoE activity/detection)
Power
Input Voltage
12/24/48 V DC (12 - 57 V DC), 1 single input
(no redundancy)
Input Current (max.)
3.12 A @ 12 VDC
2.81 A @ 24 VDC
1.30 A @ 48 VDC
Connection
One removable 4-pin terminal block, Wiring cable 12-
24AWG
Overload Current Protection Present
Reverse Polarity Protection Present
PoE
Total power budget
30 W @ 12-23 V DC; 60 W @ 24-57 V DC
PoE Pinout
Mode A: Pin 1, 2 (V+); Pin 3, 6 (V-); Alternative A; MDI-X
Physical Characteristics
Housing
IP30 protection, metal
Dimension (W x H x D)
41 x 95 x 70 mm (1.61 x 2.75 x 3.74 inch)
Weight
370 g
Installation
DIN-rail
Environmental conditions
Operating Temperature
-40 to 75°C (-40 to 167°F)
Storage Temperature
-40 to 85°C (-40 to 185°F)
Ambient Relative Humidity 5 to 95% (non-condensing)
Operating Altitude
Up to 2000 m
Regulatory Approvals
Safety
UL 61010-1,
UL 61010-2-201
EMC
EN 55032, EN 55024, FCC Part 15 Subpart B Class A,
IEC 61000-4-2 ESD: Contact: 4 kV; Air: 8 kV,
IEC 61000-4-3 RS: 80 MHz to 1 Ghz: 3 V/m,
IEC 61000-4-4 EFT: Power: 0.5 kV; Signal: 0.5 kV,
IEC 61000-4-5 Surge: Power: 0.5kV; Signal: 1 kV,
IEC 61000-4-6 CS: 3 Vrms
Shock
IEC 60068-2-27
Free Fall
IEC 60068-2-31
Vibration
IEC 60068-2-6
MTBF
Time
3.165.390 hrs
Database
Telcordia SR332
Warranty
Time Period
5 years
Contact Information
Weidmüller Interface GmbH & Co. KG
Klingenbergstraße 26, 32758 Detmold / Germany
Phone +49 (0) 5231 14-0, Fax +49 (0) 5231 14-292083
, Internet
www.weidmueller.com