User Manual Managed Switches
75
port to which no bridges are attached. The flag may be automatically
computed or explicitly configured. Each Edge Port transits directly to the
Forwarding Port State, since there is no possibility of it participating in a
loop.
Point-to-Point
Indicates a connection to exactly another bridge. The flag may be
automatically computed or explicitly configured. The point-to-point
properties of a port affect how fast it can transit to STP states.
Uptime
The time since the bridge port was last initialized.
3.6.4.9 Port Status
This page displays the STP CIST port status for physical ports of the switch.
In the table shown on the page is displayed the following information for each port:
CIST Role
The current STP port role of the CIST port. The port role can be one of
the following values:
AlternatePort
BackupPort
RootPort
DesignatedPort
Disabled
Non-STP
CIST State
The current STP port state of the CIST port. The port state can be one of
the following values:
Disabled
Learning
Forwarding
Uptime
The time since the bridge port was last initialized.
