Weidmuller SAI Active Universal Pro Series, Руководство пользователя

Страница: 56 / 177

Connecting the SAI Distributor
5.7 SAI-AU M12 SB 8DIO
The SAI distributor Active Universal is equipped with
the functions of a decentralised I/O system. Each
distributor is equipped with module-specific actua-
tor/sensor functions and a Fieldbus interface. The
modules combine the complete electronics in a wa-
ter- and dust-proof protected housing. That enables
their use in harsh environments.
The module SAI-AU M12 SB 8DIO is designed to
connect 8 digital sensors. Alternatively, up to eight
channels can be used as outputs. The outputs are
designed for a load current of 0.5 A.
The signals are connected via 4 M12 male connec-
tors with 2 channels per plug-in.
Figure 31 SAI-AU M12 SB 8DIO
HINWEIS
After a change of the Subbus modules is
in many situations a new start of the ga-
teway necessary.
HINWEIS
The DESINA functionality can only be
used if the two relevant configurable IOs
are parameterised as inputs.
LEDs
UB Supply voltage UB
Supply for the module and
the plug-in stations 1 though
4.
UQ1 Supply voltage UQ1
Supply for the outputs
O1...O4
Com Communication with the
gateway
IO1 to IO8 Digital inputs and outputs
Connections
AUX IN Supply voltage UQ1, UQ2
SUB IN Sub-bus input
SUB OUT Sub-bus output
1 to 4 Variably connected with in-
puts and outputs (sum 8).
Table 33 SAI-AU M12 SB 8DIO
56 5663600000/1.4/09.09