- 4 -
Mounting Dimensions
DIN-Rail Mounting
The aluminum DIN-Rail attachment plate should already be fixed to the back
panel of the IE-SW-PL06M-2TX-4PoE when you take it out of the box. If
you need to reattach the DIN-Rail attachment plate to the switch, make sure
the stiff metal spring is situated towards the top, as shown by the following
figures.
STEP 1
—
Insert the top of the
DIN-Rail into the slot just below the
stiff metal spring.
STEP 2
—
The DIN-Rail attachment
unit will snap into place as shown in
the following illustration.
To remove the Ethernet switch from the DIN-Rail, simply reverse Steps 1 and
2 above.
