Cleaning and maintenance
136
1449820000/1.4/04.17
Before you can remove the cleaning unit, you have
to put the printhead in the unlocking position (see
the figure below).
Figure 164
Cleaning unit unlocked
NOTE
Turn the printhead just 90°
counterclockwise. Turning it clockwise
will ruin the mechanism.
Figure 165
Unlocking the cleaning unit
6
Insert a screwdriver in the printhead unlocker (B)
and turn the printhead (A) 90° counterclockwise
so that it reaches the unlocking position (see
Figure 164).
Figure 166
Detaching the hose
7
Detach the hose (A) from the mechanical
connector (B).
Figure 167
Removing the retaining screws
8
Remove the cleaning unit’s retaining screws (A)
and (B).
Important information
Put on the disposable gloves.
Remove the cleaning unit as horizontally
as possible.
