Weider WESY1938C.0, Руководство пользователя, Страница: 14 / 28

14
19. Route the Low Cable (53) under a 90mm Pulley
(48) and through the Upright (3). Attach the Pulley
inside the Upright with an M10 x 67mm Bolt (71),
two M10 Washers (57), two 12mm Spacers (52),
and an M10 Locknut (56).
20. Route the Low Cable (53) over a 90mm Pulley
(48). Attach the Pulley and two Half Guards (43)
to the Double U-bracket (63) with an M10 x 46mm
Bolt (81) and an M10 Locknut (56). Make sure
that the Half Guards are on the outside of the
U-bracket as shown.
43
20
56
3
53
52
52
57
57
48
71
19
21. Route the Low Cable (53) under a 90mm Pulley
(48). Attach the Pulley and two Half Guards (43)
to the Base (1) with an M10 x 46mm Bolt (81) and
an M10 Locknut (56). Make sure that the Half
Guards are on the outside of the bracket as
shown.
53
43
1
43
81
56
21
63
81
48
56
53
48