12
17. Attach a 2 3/4” Pulley (23) to the right Press Arm
(8) with an M10 x 53mm Button Bolt (61), two
M10 Washers (71), two 5mm Spacers (25), two
Finger Guards (27), and an M10 Nylon Locknut
(73).
See the inset drawing. Orient the finger
guards and pulley as shown. Make sure the
Press Arm Cable (30) is in the groove of the
Pulley.
19. Attach the Backrest (18) to the Upright (3) with
the two M6 x 16mm Screws (60) and the M6 x
127mm Screw (79).
18.
Make sure the Press Arm Cable (30) is routed
under the indicated welded rods.
Attach a “V”-pulley (22) to the Swivel Arm (16)
with an M10 x 64mm Button Bolt (75), two M10
Washers (71), two 5mm Spacers (25), and an
M10 Nylon Locknut (73).
17
18
73
30
71
71
61
8
75
71
16
71
73
25
25
30
22
25
27
23
27
25
19
79
60
60
18
3
Welded
Rods
27
27
25
