Weider LEGACY SLANT BENCH, Руководство пользователя, Страница: 7 / 16

7
ASSEMBLY
2. Orient a Stabilizer (4) so that the widest sides
(A) of the 50mm Outer Caps (12) touch the floor.
Attach the Stabilizer (4) to the Front Leg (2)
with two M10 x 65mm Carriage Bolts (18) and
two M10 Locknuts (19); do not tighten the
Locknuts yet.
2
4
12
12
2
19
18
A
A
• To hire an authorized service technician to
assemble this product, call 1-800-445-2480.
• Assembly requires two persons.
• Place all parts in a cleared area and remove the
packing materials. Do not dispose of the packing
materials until you finish all assembly steps.
• To identify small parts, see page 6.
• In addition to the included tool(s), assembly
requires the following tools:
two adjustable wrenches
one rubber mallet
one standard screwdriver
one Phillips screwdriver
Assembly may be easier if you have a set of
wrenches. To avoid damaging parts, do not use
power tools.
1. Go to my.weiderfitness.com on your
computer and register your product.
• documents your ownership
• activates your warranty
• ensures priority customer support if assistance
is ever needed
Note: If you do not have internet access, call
Customer Care (see the front cover of this
manual) and register your product.
1