13
16. Attach a Handle (12) to the Left Frame (4) with
two M10 x 80mm Button Bolts (52), two M10
Curved Washers (50), and two M10 Locknuts
(65).
Attach the other Handle (12) in the same
way.
Make sure that all parts are properly tight-
ened before you use the inversion system.
17.
16
65
50
52
12
12
65
4
35
13
65 10
WARNING:
HOW TO LOCK THE INVERSION
SYSTEM FOR STORE DISPLAY OR TO
PREVENT UNSUPERVISED USE
When the inversion system is displayed
in a store, or when it is not in use, it
should be locked to prevent unsuper-
vised use.
First, insert the threaded end of the Lock
Pin (35) into the Support Leg (13), and
position the other end of the Lock Pin
on top of the Leg Frame (10). Then,
tighten an M10 Locknut (65) onto the
Lock Pin.
17
18.
Make sure that all parts are properly tightened before you use the inversion system. The use of all
remaining parts will be explained in ADJUSTMENT, starting on page 14.
