manualshive.com logo in svg

Weider 9300 PRO, Руководство пользователя, Страница: 18 / 33

Поделиться
Скачать
Weider 9300 PRO Скачать руководство пользователя страница 18

18

43. Wrap the Ab Cable (85) around a 3 1/2Ó

Pulley (82). Attach the Pulley and a Cable
Trap (80) to the Ab Upright (1) with the 3/8Ó x
3 3/4Ó Bolt (76) and a 3/8Ó Nylon Locknut (42).

Be sure that the Cable Trap is in the indi-
cated position.

44. Remove the indicated 3/8Ó x 2Ó Bolt (50), the

3/8Ó Nylon Locknut (42), the 3 1/2Ó Pulley
(82), and the Cable Trap (80) from the indicat-
ed Pulley Plates (31). Lay the Ab Cable (85)
over the Pulley. Reattach the Pulley and the
Cable Trap to the 

lowest

hole in the Pulley

Plates with the Bolt and the Nylon Locknut.

Make sure that the Cable Trap is turned to
hold the Cable in place.

45. Wrap the Ab Cable (85) around a 3 1/2Ó

Pulley (82). Attach the Pulley to the Ab
Upright (1) with the 3/8Ó x 3 3/4Ó Bolt (76), a
3/8Ó Washer (38), and a 3/8Ó Nylon Locknut
(42). 

The ball on the Cable must be on the

indicated side of the Pulley. Be sure that
the Cable is between the Pulley and the
post, and that the Cable and Pulley move
smoothly. 

43

44

45

CABLE ASSEMBL

Y

42

31

42

82

80

50

80

82

85

76

1

42

38

82

76

Post

85

1

85

Содержание 9300 PRO


































Отзывы:

Нет отзывов