1.
Before beginning assembly, be sure that you
have read and understand the information on
the previous page.
Press a 38mm x 38mm Inner Cap (16) into the end
of the Frame (1). Press Two 50mm Round Outer
Caps (9) onto the Adjustment Leg (3). Press a
38mm x 50mm Inner Cap (8) into the end of the
Adjustment Leg.
Align the indicated holes in the Frame (1) and the
Adjustment Leg (3). Attach the Adjustment Leg to
the Frame with two Lock Pins (11).
2.
Align the indicated holes. Attach the Pivot Leg (2) to
the Frame (1) with the M10 x 68mm Bolt (14) and
the M10 Nylon Locknut (13).
Secure the Pivot Leg (2) by inserting the “L” Pin (15)
through the indicated hole in the Pivot Leg and the
corresponding hole in the Frame (1).
Press Two 50mm Round Outer Caps (9) onto the
Pivot Leg (2).
3.
Press 3/4” Round Inner Caps (7) into the ends of
both Pad Tubes (10).
Insert the Pad Tubes (10) through the Adjustment
Leg (3).
Slide Foam Pads (6) onto the ends of both Pad
Tubes (10).
4.
Attach the Bench (12) to the Frame (1) with two M6
x 48mm Bolts (4) and two M6 x 16mm Bolts (5).
4
1
1
8
16
11
9
3
2
3
5
1
13
2
9
14
Align these
Holes
Align these
Holes
3
12
1
5
4
10
7
6
7
6
15
