WEG RUW-01, Руководство по установке, настройке и эксплуатации, Страница: 6 / 17

6 | RUW-01 - English -
CANopen Remote Unit
4.1 MECHANICAL INSTALLATION
The RUW-01 remote unit must be installed on a 35 mm DIN rail,
Figure 1 .
Figure 1: RUW01 installation
4.2 ELECTRIC INSTALLATION
The RUW-01 is powered by an external 24 Vdc +/- 15 % power supply, with a
current capacity of at least 500 mA.
The protective earth must also be connected. The connection is done through
the XC4 terminal strip.
3 2 1
Figure 2: RUW-01 power supply
„
Terminal 1: (+) 24 Vdc (±15 %).
„
Terminal 2: (-) GND.
„
Terminal 3: PE (Protective earth).