WEG PSRW, Руководство пользователя

Страница: 46 / 59

9
Programming With WPS
9-12 | PSRW
9.5.1 Configuring the Inputs
The component block used to configure the inputs is described below.
De-bounce: it selects a time filter to prevent
contacts bouncing being interpreted as
input activation.
Physical terminal
names – same
names present in
PSWR label.
Input type:
it selects
what kind of device will be
connected on PSRW input.
Input name
Reset dependent: It
defines whether the input
depends on a manual
reset or is automatic. For
manual reset, this option
must be selected
The options for Input type combo-box are:
If the input type is “Two hands control”, the block changes to a big one containing the next block, as the figure
bellow shows.
The two hands control type is only allowed between inputs 1 and 2 or between inputs 3 and 4. For this option, the
reset option remains disabled for automatic reset of the two-hand control.