WEG PSRW, Руководство пользователя

Страница: 44 / 59

9
Programming With WPS
9-10 | PSRW
9.4 WIZARDS
PSRW is configured through Wizards wizard Configurator and Wizard Monitor. In the first one, it is possible to:
„
Design a configuration through component blocks.
„
Print and transfer a configuration.
„
Read configurations from PSRW.
In the PSRW monitor is possible to:
„
Read configurations from PSRW.
„
Print a configuration.
„
Validate a configuration.
The Validation command is sent only through Wizard Monitor. Without the Validation, PSRW discard the changes
and return to the previous configuration stored when it disconnect from PC.
9.4.1 Wizard configurator
The following figure shows the user interface of the wizard Configurator.
Wizard Toolbar
Show/hide
External devices
button
Drawing area
Configurator
Buttons
Wizard Toolbar: displays the commands for monitoring , transfer and printing values from
drawing area.
Show/hide external devices button : expose or hide the external devices on the drawing sheet. These
devices are examples of how to connect the most common input and output devices on PSRW.
Drawing area: area where is possible to set configurations of PSRW. A more detailed explanation will be given
in the following sections.
Configurator Buttons: displays commands for zoom in/out , retrieve configurations from physical
PSRW , and exit from Prog-mode .