WYM400 USER MANUAL
I 7
4.3. Control Panel
a.
Display
b.
Time lamp
c.
Temperature lamp
d.
Function button
e.
Start / Cancel button
f.
Add / Reduce button
4.4. Instructions
Plug in the cable. You will see “88” on the screen and hear a beep, and then there will be “- -“ on
the screen, which signifies that your device is on and ready to be set up. (LEDs should be off)
1. When you press “Function” once, LEDs will turn green as seen in Figure A. “Temp” LED will
blink green.
2. Using the “+/-“ buttons, set the fermentation temperature as shown in Figure B.
3. After the required temperature is set, press “Start/Cancel” as shown in Figure C; “Temp” LED
will be red and “Time” LED will blink.
4. Using the “+/-“ buttons, set the fermentation time as shown in Figure D.
5. After the required time is set, press “Start/Cancel”. “Temp” and “Time” LEDs will turn red then,
and the fermentation process will have begun.
6. If you want to cancel, press and hold on “Start/Cancel”.
