I
WMA370 USER MANUAL
10
long time or you suspect they are defective.
To test your audio monitor:
1.Place the parent unit and the baby unit in the same room to test the product. Make
sure the baby unit is at least 1.5 metres away from the parent unit.
2.Press and hold on the baby unit until the Power indicator light turns on.
3.Press and hold on the parent unit until the Power indicator turns on steadily. The
parent unit plays sound detected from the baby unit. Your audio monitor is now
ready for use.
Note
If no connection can be established, the Power indicator light on the parent unit
flashes in reen.
4. USING YOURBABYMONITOR
4.1 Power the bab
y unit on or off
•Press and hold for 2 seconds to turn on the baby unit. The Power indicator light turns
on.
•Press and hold for 2 seconds again to turn off the ba y unit. The Power indicator
light tur
ns off
.
4.2 Power the paren
t unit on or off
•Press and hold for 2 seconds to turn on the parent unit. The Power indicator light
turns on.
•Press and hold for 2 seconds again to turn off the pa ent unit. The Power indicator
light tur
ns off
.
4.3 Adjust speaker volume
There are fi e volume levels (Level 1 to Level 5) plus v
olume off
on parent unit.
When adjusting speaker volume, the sensitivity indicator LED(s) light(s) up briefly o
indicate the current volume level. To adjust the speaker volume:
Press to increase and to decrease the volume of the parent unit.
NOTE
You will hear two beeps when the volume level has reached the minimum or
maximum level.
5. TROUBLESHOOTING
If you have difficu y with your audio monitor, please try the suggestions below.
My audio monitor does not work at all.
