Installing the Battery
Insert the battery into the battery slot, as shown in the diagram below.
One end of the battery contact ring is facing the direction of the lamp head.
3500 lumens
100° flood
Approx. 70 minutes (100% flood)
Flood / Red / Blue / Red+Blue
100% / 75% / 50% / 25% / cycle
3x18650 lithium battery packs (2900mAh/11.1V/32.19Wh)
5700K
100m / 330ft
470g on land; 235g underwater
55(D) x 125(L)mm
Standard Accessories
□
Diving Light
□
Battery
□
Charger
□
Spare O-rings
□
User Manual
□
O-ring Removal Tool
□
Cetification
□
Guarantee Card
①
Right Button
②
Left Button
③
Battery Level Indicator LED
④
Light Head
⑤
Tail Cap
⑥
Flood Beam LED
⑦
Red & Blue LEDs
⑧
Focus off light and trigger flash receiving port
⑨
Optical fiber remote control port
Brightness
：
Beam Angle
：
Burn Time
：
Modes:
Flood Power Level:
Battery
：
CCT
：
Depth Rated
：
Weight
：
Dimension
：
Charging the Battery
Step 1: Insert the DC plug into the
battery. (As shown in the diagram
below)
.
Step 2: Plug the charger into the wall
outlet. The charger's indicator will turn
red signifying the charger is receiving
power
.
Step 3: When the battery has finished
charging, the charger's indicator will
turn green.
Noted: Charge time is approximately 2.5
hours
* Warning:
Be sure to use the special charger
provided by the manufacturer;
otherwise, it may cause battery damage
or other dangerous conditions.
Specifications
Please read the manually carefully before using the focus light
Focus / Video Light
Features
Smart Focus 3500
8
9
Battery level indicator
Low power, <5%
Capacity
100-80%
80-30%
30-5%
State
Blue
Green
Red
Red flashing
